AlaKran Prep Gun. The power of 1/4.
  • AlaKran Prep Gun. The power of 1/4.

    An AmeriBlaster exclusive.
    This will fit Stock HF Pots 20 40 or 110 lbs pots. Will fit other 3/8 bottom discharge bug pots please ask.
    This is Restricted to USA Sales only. This product will not be shipped to any export house. 
    This will be a build when ordered kit. Expect a 3 to 6 day build time. This kit is custom made build in order received. First come first served.
    We vigorously protect our products under USA registered trademarks and patent rights.
    What's a Trigger Prep Gun?
    A Trigger Gun works by using the high psi and low psi feature that all small pots have. 
    The low pressure side is the bottom discharge, the high pressure side is the top side of  pot.
    Our system works via a special remote manifold, most pot setups use a manifold located at the bottom of the pot this system removes the mix manifold from the bottom to a remote location.
    Eliminate a bulky and heavy blast hose.
    By using the media under low pressure one can eliminate a bulky blast hose. MEDIA traveling at low pressure does not wear parts, valves , fittings or hoses quickly. The low pressure side is always located at the bottom of the pot, a properly filled pot will discharge media at a low pressure, example a pot pressurized at 90 psi will discharge the media through the bottom bung at around 15 to 20 psi. The media acts as a buffer.
    The high pressure side is the power that moves media at high speeds, just like any throttle, the throttle must be applied CORRECTLY.
    This is a 1/4 system and this system has the ability to overpower a 1/8 or 5/32.
    The function.
    Practical use of power without dealing with a ball valve controlling a high pressure blast stream.
    A simple 1/4 ball valve controls the media under Low pressure virtually eliminating excessive wear. This is so practical because the operator can control the MIX in real time making quick and easy adjustments during real time blasting.
    This makes this system so efficient and powerful, real time control at your fingertips.
    Distance is your friend.
    The trigger prep gun provides distance which means a better blasting experience, get up live and personal without getting to close.
    The power of 1/4.
    We tested various combinations including 1/2 and 3/8 in multiple combinations, the final result? 1/4 was better suited for the air throttle and the media feed, of course you can use a 1/8-. 5/32 -3/16- or a big 1/4.
    Special? You bet.
    So special we even built a three banded venturi nozzle holder, similar to our best seller HuraKano. Our three banded nozzle holder has a smaller diameter concentrator allowing for a condensed blast stream generating more of that sucking effect.
    A practical lower manifold with clean out. A 15% larger at the nipple then the stock Original Equipment nipple supplied by the manufacturer, the best part it will directly screw into that stock 3/8 lower bung.
    A clean out or drain manifold can help you drain the pot in order to perform maintenance and switch out media. ( never store/save media inside the tank for extended periods of time it will clump)
    Once connected you can master your small pot. The Trigger prep gun operates like any small pot with the exception of two very important features: 
    A remote manifold.
    A HIGH LOW function.
    How to use.
    4. Use appropriate media to nozzle orifice size.
    5. Select nozzle appropriate to air compressor being used.
    6. Ensure that media ball valve is closed.
    7. Make sure to fill pot CORRECTLY NEVER over fill and NEVER run a pot to EMPTY.
    8. Pressurize your pot.
    9. Pick up the gun.
    10.  Depress the trigger...not all the way.
    11. At the same time open the media ball valve, not all the way.
    12. This is where you get the MIX CORRECTLY by adjusting both once adjusted you can keep the media set and only use the air to maintain the blast stream.
    13. Once you finish make sure you close the media ball valve and let go of the trigger.
    What you get:
    1. One HuraKano nozzle holder.
    2. A four pack of our ceramic nozzles 1/8- 5-32- 3/16- 1/4.
    3. Injector manifold in 1/4×1/4
    4. One high quality 1/4 ball valve low pressure side.
    5. One trigger air gun high pressure side.
    6. 300 psi air hose rubber.
    7. 300 psi media rubber hose.
    8. Bottom feed manifold with cleanout.
    9. Air adapter for install 1/4 air plug.
    **WE STAND BY OUR PRODUCTS! We ensure that our products work before it leaves our shop. Nozzle holders, Stinger, El Fang, HuraKano, Skaleto or ChaMuko, lower feeder manifolds and all HP manifolds are built to our specific specifications. A 30 day warranty is included for the above parts this warranty covers metal failure, welded steel parts failure. It does not cover Media wear, painted or coated finishes gasket wear or excessive wear caused by excessive use. All Kits are custom made to order no refunds or returns on kits. We reserve the right to cancel any order returning payment to the listed purchaser.
    Wear items are not under warranty, these include the following parts:
    *All steel barbs* or hose couplings. *Ball valves in the following sizes: 3/8 or 1/2 inch these are wear items and we offer no warranty for any ball valve included in any kit. *Any ceramic or Boron Carbide nozzle we sell or offer in any kit. *Any steel or iron components fittings, couplers, bushings, elbows, nipples or t fittings. Any part exposed to the elements and or high pressure applications in which any metal is exposed to direct flow of any type of media. Rubber hoses or blast hoses of any brand which is not under warranty by the original manufacturer or wholesaler. All consumables as defined by any manufacturer, consumables are parts that will wear based on any amount of use. Pot blasters sold by Ameriblaster are under FULL warranty for a period of 6 months. The warranty covers replacement parts as follows: Blast Hose, manifolds, pressure tank, wheel kits including wheels and tires, Relocation kit manifold feed. Warranty does not cover Consumables. We carry all replacement parts, these parts are high grade parts,we carry consumables.
    Items sold as visual defective are not covered by warranty, visual defective is the following: scratch or dent, chipped scraped or defective paint we will offer manifolds or nozzle holders with visual defective coatings at times.
    Free or promotional gifts are not under ANY warranty, unreleased products or demo nozzle holders including manifolds, or any free item is not under warranty. Unsure of purchase date, or how to start a return call or send us a message we have purchase and tracking information for all online orders. Any other questions please ask.
    America & Enrique Garnica.
    We vigorously protect our products under USA registered trademarks and protected patent rights.