No need to buy free advise.
In a week there are dozens of questions about hooking up a pot to a cabinet.
This is advice, it's up to YOU to decide, Pot Too Cabinet, siphon or pressure pot, foot pedal, switch or ball valve.
Always remember:
1. Attaching a pot to a cabinet will provide better performance then ANY siphon system.
2. Performance and use will ALWAYS depend on operator, modifications, blasting pressure, media selection, and compressor to nozzle size.
3. More power equals more dust.
4. More power equals quicker media defragmentation.
Set ups:
⚡Simple and economical⚡
The most simple and most economical is finding a location on your cabinet, drilling out a hole and running a blast hose from the pot to the inside cabinet.
It will work, it's the most basic basic.
** ideal feed hole  22.mm around 7/8. This is done to facilitate the adding of a Tap Kit.
💥Tap Hardware Kit.
Here's a link.
Check out my product! https://www.ameriblaster.com/product-page/tap-hardware-and-hose-kit
This kit is the most basic kit that we sell. It includes a 5 foot quality blast hose that goes inside the cabinet, it also includes an El FanG Caged Nozzle Holder with a 1/8 Ceramic Nozzle. This kit includes the hardware which is the actual Tap. The tap feeds your blast hose to the cabinet.
You can use a ball valve at the cabinet to use as an off and on control.
💥Tap Kit ll.
This kit is a better kit that uses a Pneumatic Pinch Valve with a  toggle Switch Control. Here's a link.
Check out my product! https://www.ameriblaster.com/product-page/tap-kit-2-el-vampiro-pneumatic-valve
This kit will attach to your blast hose end. The Pneumatic Pinch Valve is connected to your small regulated auxiliary pancake or hotdog compressor.
This is better than a ball valve inside the cabinet or a Ball Valve mounted outside of the cabinet.
💥El MaXimo VamPiro. Here's a link 
Check out my product! https://www.ameriblaster.com/product-page/ready-to-go-el-maximo-inline-pneumatic-pinch-valve
This is the big stuff.
This is a Universal Pneumatic Pinch Valve System that has a foot pedal control.
This does not include the cabinet hardware kit.
This includes the foot pedal, feed lines, quick couplers, Pinch Air Valve, Pinch Tube, and Pinch bladder hose. Connect this kit to your blast hose with it's quick couplers and use the the foot pedal as a On and Off DeadMan control.
You can Purchase the Tap Hardware Kit to use with this kit.
We also make relocation and Elevated Control Kits that can be used as an off and on control.
*"How to use an Elevated Control system to control the in and off function of your pot.
You can add a Tap Hardware Kit to your cabinet.
Or
You can use your existing blast hose and plumb it into your cabinet. Easy drill out a 22 mm, 7/8
Hole . Pull up your pot to the front of the cabinet,  you can use a small feed blast hose or your existing blast hose. By using the ball valves (media/throttle)  you can cut off the blast stream. It is a bit basic but it works and the best part, your controls are located up higher then stock pots.